Table of Contents
Advertisement
12. Cine Function
12.1 Introduction
CAUTION:
When an image is frozen, the images immediately before the frozen image can be
played back and edited. This function is called Cine. Cine images are cleared by
turning OFF the power or unfreezing the frozen image.
12.2 Cine Playback
(1) Press
(2) When the trackball is operated, the system enters frame-advance playback mode.
• Operate the trackball to the right for forward playback.
• Operate the trackball to the left for reverse playback.
* For M-mode images, the trackball operation is opposite to the above.
(3) When the trackball dial (the dial around the trackball) is turned during frame-
advance playback, the system enters continuous playback mode. The playback
speed can be changed using the dial.
• Operate the dial clockwise to increase the playback speed.
• Operate the dial counterclockwise to decrease the playback speed.
When the trackball is operated, the system returns to frame-advance playback
mode.
(4) Continuous playback edit function (setting of the playback range)
It is possible to set the start frame and end frame for continuous playback in frame-
advance playback mode.
(a) Operate the trackball to display the start frame of the playback range and
press
(b) Operate the trackball to display the end frame and press
(c) Turn the trackball dial. The images between the specified start and end
frames are played back continuously.
When performing examination of a new patient, press
delete the recorded data in the image memory. Otherwise, the
new data may be confused with the data of the previous
patient.
to freeze the image.
FRZ
.
SET
No. 2B730-973EN*D
12-1
to
.
NEXT
*
Advertisement
Table of Contents
