Using A Pluggable Transceiver (Sfp/Sfp+) - Siemens SIMATIC NET SFP Operating Instructions Manual

Notes on SCALANCE W:
Note
With a SCALANCE W786-2, do not plug or pull an SFP transceiver during operation!
If you have questions on the use of SIMATIC NET products, please contact your Siemens sales
partner.
4.3

Using a pluggable transceiver (SFP/SFP+)

NOTICE
Electrostatic sensitive devices (ESD)
Plug-in transceiver are delivered in a carton. The cartons protect the plug-in transceiver against
direct contact and thus against ESD damages.
• Only unpack the plug-in transceiver in an ESD-protected mounting and installation area.
• Make sure that the corresponding safety measures are met if you use the plug-in transceiver:
• Before touching an ESD, discharge your own body. To this purpose, touch a conductive,
• Do not touch the electrical contacts of the PCB.
• Only always touch the plug-in transceiver at the metal enclosure.
Figure 4-1
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
– They are permanently grounded via an ESD wristband.
– You wear ESD shoes or ESD shoe grounding protection strip in connection with an ESD
base.
grounded object immediately beforehand, e.g. a bare metal control cabinet part.
Plugging in a transceiver
4.3 Using a pluggable transceiver (SFP/SFP+)
Assembling
19