Table of Contents
Advertisement
Properties
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
8.1.8
SFP992-1+
Properties
Transmission mode
Transmission speed
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
8.1.9
SFP992-1LD/SFP992-1LD(C)
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
Multimode fiber-optic cable
Class1-LASER "Eye safe"
850 nm
At 50 µm fiber core diameter
)
At 62.5 µm fiber core diameter
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-LX
1000 Mbps (Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
At 50 µm fiber core diameter
)
At 62.5 µm fiber core diameter
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-LX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
Technical data
8.1 SFP transceiver
750 m
350 m
-9.5 dBm
-2.5 dBm
-17 dBm
-3 dBm
2 km
1 km
-9 dBm
-1 dBm
-19 dBm
-1 dBm
39
Advertisement
Table of Contents
