Table of Contents
Advertisement
Properties
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
8.1.12
SFP992-1LH+
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
8.1.13
SFP992-1ELH
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
Sensitivity min.
Input power max.
1000Base-ZX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1550 nm
70 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-ZX
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1550 nm
120 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
Technical data
8.1 SFP transceiver
-23 dBm
-3 dBm
0 dBm
5 dBm
-22 dBm
-3 dBm
0 dBm
5 dBm
-32 dBm
-8 dBm
41
Advertisement
Table of Contents
