*) Depending on the cable used, you can find additional information in the "Industrial
Ethernet / PROFINET Passive network components" System Manual, see also section
"Introduction", paragraph "Additional documentation".
8.1.3
SFP991-1LD/SFP991-1LD(C)
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
8.1.4
SFP991-1LD A
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
*
Depending on the cable used, you can find additional information in the "Industrial Ethernet / PROFINET
)
Passive network components" System Manual, see also section "Introduction", paragraph "Additional
documentation".
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
100Base-LX complying with IEEE 802.3
100 Mbps (Fast Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
26 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
100Base-LX complying with IEEE 802.3
100 Mbps (Fast Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
26 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
Technical data
8.1 SFP transceiver
-15 dBm
-8 dBm
-28 dBm
-8 dBm
-15 dBm
-8 dBm
-31 dBm
-8 dBm
37