Table of Contents
Advertisement
ATEX, IECEx, UKEX and CCC Ex certification
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous Area".
You will find this document
• on the data medium that ships with some devices.
• on the Internet pages under Siemens Industry Online Support
Enter the document identification number "C234" as the search term.
The SIMATIC NET products described in these operating instructions meet the requirements
of the EU directive 2014/34/EU "Equipment and Protective Devices for Use in Potentially
Explosive Atmospheres".
Note
Type of protection of the device
The devices are approved for various types of protection. You can find the type of protection of
your device and the Ex certificate number on the packaging label.
Note
Use the plug-in transceivers only SIMATIC NET devices that are listed in the ATEX/IECEx/UKEX
certificates DEKRA 18ATEX0078 U, IECEx DEK 18.0050U, DEKRA 21UKEX0006 U and the
respective CCC Ex certificates.
The markings of the electrical devices are:
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2023, A5E02630804-18
WARNING
support.industry.siemens.com/cs/ww/en/ps/15273/cert).
II 3 G Ex ec IIC T4 Gc
DEKRA 18ATEX0078 U
IECEx DEK 18.0050U
DEKRA 21UKEX0006 U
Importer UK:
Siemens plc,
Manchester
M20 2UR
(Ex na IIC T4 Gc, not on the nameplate)
2020322310002916
Approvals
(https://
59
Advertisement
Table of Contents
