Table of Contents
Advertisement
43-
Contact readiness Auto Test
The output of 2K-1 module consists of 2 contacts K11-K12 and K13-K14. Configure these two
output contacts as per following to control the fans.
Figure 92
Modules
47:
AR saugata. cas@in abe.com
Figure 93
© Signalling modules
Qi
saugata dasein abi
Serial
Soft
INPUTS
'OUTPUTS
Status
Status
Ol
Pa
Configuration
Configuration
wel
On
v
Qo
¥
4
Or
v
Qe
y
Autotest command that activates the automatic sequence of output tests (contacts and
LEDs) and input test (LED), and includes the following operations:
1. Reset output contacts (= open) and LEDs ( off).
2. Turn on all the LEDs in sequence (output and input)
3. Closure and shutdown of the two output contacts in sequence, switching on the relative
LEDs.
4. Restore initial conditions
The Autotest command closes the contacts regardless of the configuration set by the user
80| © 2020 Emax 2 Retrofill Circuit Breakers 800-5000A
2TSA451009P0000 Rev-B
Advertisement
Table of Contents
