During Operation; Starting The Engine - Toro Reelmaster 7000-D Operator's Manual

Overview of the InfoCenter Display (continued)
Setting the Blade Count
1. In the Settings Menu, scroll down to Blade Count.
2. Press the right button to change the blade count between 5, 8, or 11 blade reels.
Setting the Mow Speed
1. In the Settings Menu, scroll down to Mow Speed and press the right button.
2. Use the center and right button to select the appropriate mow speed set on the
mechanical mow-speed limiter on the traction pedal.
3. Press the left button to exit mow speed and save the setting.
Setting the Height of Cut (HOC)
1. In the Settings Menu, scroll down to HOC.
2. Press the right button to select HOC.
3. Use the center and right button to select the HOC setting. If the exact setting is not
displayed, select the nearest HOC setting from the list displayed.
4. Press the left button to exit HOC and save the setting.

During Operation

Starting the Engine

Bleed the fuel system if any of the following situations have occurred:
• The engine has shut off because the machine ran out of fuel.
• Maintenance was performed on the fuel system components.
1. Sit in the operator's seat, engage the parking brake, and ensure that your foot is off the
traction pedal.
2. Move the engine-throttle control to the S
3. Turn the key to the R
The glow-plug indicator displays in the InfoCenter.
4. When the glow indicator shuts off, turn the key to the S
Operation: Before Operation
IMPORTANT
LOW
position.
UN
Page 5–11
position.
position.
TART
3466-706 A