Testing In Dalt Mode - Motorola MXP600 Manual

MN006362A01-AL
Chapter 4 : Test Setup and Testing
2 Enter 3-button test by pressing Power Button, One Touch Button 1, and One Touch Button 2
simultaneously for one minute and choose BP DALT mode.
4.12.1

Testing in DALT Mode

NOTE:
• Any key pressed causes the test to advance from one step to the next. You are to respond
accordingly to the instructions on the screen.
• Press the side buttons to skip the detailed tests and go to the next/preview major test.
• For several tests, you are required to indicate the test result by pressing keys as shown on
the display.
• For the SD card 3-button test, this test erases all existing SD card contents. Re-format the
SD card in application mode after the test to ensure that the SD card is functional.
Prerequisites:
• Ensure that SD card and SIM card are inserted to perform the SD Card Test and SIM Card Test.
• Ensure that CRYPTR card is inserted to perform the MACE test.
• Prepare a Remote Speaker Microphone (RSM) and a Personal Hands-Free (PHF) accessories for
Accessory Connect Test.
• Prepare supported Bluetooth accessories for Bluetooth Test.
Procedure:
Display Test
1 The display shows:
Display
Test
2 Do the following:
Action
Press any key.
Press any key consecutive-
ly.
Press any key.
Press any key consecutive-
ly.
Press any key.
Press any key.
Press any key.
3 Press the corresponding key to proceed to the next test.
Coin Cell Test
4 The display shows:
Coin Cell Test
1
Only applicable for MACE or U MACE model.
46
The display shows:
Horizontal red lines.
Horizontal red lines become thicker with every key press,
until it becomes fully red.
Four colored rectangles.
Vertical green lines that become thicker with every key
press, until it becomes fully green.
White screen.
Black screen.
Blue screen and
END LCD test!!!
1