Chapter 7: Radio Disassembly And Reassembly; Torque Specification Chart; Installing Or Uninstalling The Microsd Card; Installing The Microsd Card - Motorola MXP600 Manual

Chapter 7
Radio Disassembly and Reassembly
Mechanical checks and self-tests should be performed on the unit at the basic level of service.
NOTE: Read each procedure thoroughly before performing the actual task.
7.1

Torque Specification Chart

Use the recommended torque value in this chart when fastening different parts of the radio.

Table 26: Torque Specification Chart

Description
Main Board Screw to capsule insert.
Chassis Screw to front housing insert.
Keypad Screw to front housing insert.
Encoder Nut
Antenna Nut
Keypad Flex Retainer Screw
7.2

Installing or Uninstalling the MicroSD Card

NOTE: Applicable only for SD Card model.
The microSD card slot has a delicate construction. You must avoid installing or uninstalling
the microSD card unnecessarily as this action can damage the mechanism of the reader. For
copying files from your radio, you can use the USB Mass Storage Mode.

Installing the MicroSD Card

Prerequisites:
Your radio is equipped with a microSD card slot.
Procedure:
1 Remove the battery.
2 Flip open the plastic door from the finger scoop area.
NOTE: Avoid pressing on the plastic door.
Radio Disassembly and Reassembly
Part/Kit Torque
0304726J05 2.2±0.1 lb-in
FN000454A01 3.6±0.1 lb-in
FN000509A01 1.1±0.1 lb-in
FN000503A01 5.0±0.1 lb-in
FN000552A01 12±0.1 lb-in
0378212A01 1±0.1 lb-in
MN006362A01-AL
75