NEC VERSA LX Manual page 56

!
System Switch — Sets the Power/Sleep button as a power switch or a
sleep button.
!
Power Management Under AC — Specifies whether to enable power
management features when AC power is in use. When AC power is
connected to your NEC Versa system, power management is usually
disabled. If you enable this parameter, the system automatically
activates the power management profile you set, even when AC
power is used.
!
Power Savings Level — Specifies one of four levels of power
management.
High Performance provides the greatest system performance with
only minimal power conservation.
Longest Life provides the maximum amount of power savings.
Off disables power management and all device timeouts.
Custom lets you define your own power management
configuration by selecting values for specific device timeouts.
Custom lets you set the following timeouts.
– CPU Speed Control — Sets CPU performance at one of four
levels.
– Hard Disk Timeout — Sets the time delay before your hard
disk powers down.
– Video Timeout — Sets the time delay before your video
powers off.
– Peripheral Timeout — Sets the time delay before your
peripherals are controlled by power management.
– Audio Device Timeout — Sets the time delay before your
audio device powers off.
– Standby Timeout — Selects the system standby timeout
period.
Using the Software 3-11