Other Bios Setup Options; Password Protection - NEC VERSA LX Manual

!
Serial Port — Disables the port or changes its address assignment.
!
Parallel Port/Parallel Mode — Disables or reassigns the parallel port
and select a parallel port mode.
!
IR Serial Port — Enables, disables or reassigns the IR serial port.

Other BIOS Setup Options

BIOS Setup offers other options, including the following:
!
Change Language Setting — Controls the BIOS setup language
display. English and Japanese are the available options.
!
Refresh Battery — Launches the Refresh Battery utility. Once
launched, the utility fully discharges your battery to eliminate any
residual memory effect. Once refreshed, your battery is conditioned to
recharge to its full capacity. To recharge the battery, connect your
NEC Versa to AC power. This process may take up to four hours to
complete.
!
Auto Configuration with Defaults — Loads default settings.
!
Save Settings and Exit — Accepts changes made to current settings,
saves to CMOS, and exits BIOS Setup.
!
Exit Without Saving — Reverts to previously selected settings and
exits Setup.

Password Protection

Your NEC Versa supports a password for system security on several
levels. Once you set a supervisor password, you must enter it before you
can enter BIOS Setup, access the system at startup, or resume from
Suspend, depending on your configuration selection.
Your system is not protected until you set a user password and you are
not prompted to enter a user password until you set a supervisor
password.
3-14 Using the Software