Switch Settings - NEC VERSA LX Manual

8. Reassemble the system as follows:
!
!
!
Switch Settings: six-position dip switch
A six- or four-position dip switch is located underneath the keyboard. The
following list identifies each switch setting and its function.
!
Switch 1, Password Override Switch — The default setting is "OFF."
If you forget your password and cannot access the data on your NEC
Versa, change the setting to "ON" and your current password is
erased.
!
Switch 2 — Keyboard select; Default is "ON" for U.S. 85 key
keyboard.
!
Switch 3 — Reserved for factory use; Default is "ON."
!
Switch 4 — Keyboard select; Default is "ON" for U.S. 85 key
keyboard.
Lift up the keyboard and align the tabs on the front of it with the
system grooves in the system.
Reseat the keyboard in its original position.
Slide the keyboard retainers back onto the system.
Reassembling the system
Using the Hardware 4-37