NEC VERSA LX Manual page 58

Boot Device Setup
Boot Device Setup allows you to define the following functions.
!
Quick Boot — Specifies whether or not the system performs all tests
during system boot.
!
Silent Boot — Specifies whether or not to display the NEC logo
during the system boot.
!
Boot Display Device — Specifies the display device(s) for system
boot messages.
!
Docking Station Video — Selects whether or not a video card
installed in the Docking Station is enabled at system boot.
!
BootUp NumLock — Specifies whether NumLock is On or Off at
system startup.
!
Boot Devices — Specifies the sequence of boot devices and whether
or not the system attempts to boot from a device other than those
specified.
!
Other Boot Devices — Allows you to specify IDE devices as
bootable devices.
Peripheral Setup
The Peripheral Setup menu displays the connection locations between
the system and the Input/Output (I/O) ports. This menu also lets you
specify different port assignments as needed.
!
Internal Hard Drive — Enables or disables the internal hard drive.
!
USB Controller — Enables or disables the USB controller.
Note:
If you disable a device in Peripheral
Setup, you cannot enable or assign it using the
Windows 98 or Windows 95 device manager. The
device will not be listed in the Windows device list.
To control the device using the Windows device
manager, select any setting other than Disabled in
Peripheral Setup.
Using the Software 3-13