Table of Contents
Advertisement
TROUBLESHOOTING
T
The docking lever does not pull forward when trying to
dock your NEC Versa 2000 computer.
Remove the NEC Versa 2000 computer from the Medi-
aDock 2000 and check that the computer's expansion
port cover is opened and stowed properly. See "Docking
Your Versa 2000 Computer" in Chapter 2.
T
Pressing the power button does not turn on your Medi-
aDock 2000.
T
No sound can be heard from the MediaDock 2000
speakers.
T
The MediaDock 2000 volume control does not seem to
work properly; sound is either too loud or too soft.
MediaDock 2000 volume is directly related to the vol-
ume control settings in your software. If software and
hardware volume are both set to high or low, the result-
ing sound can be extremely loud or soft. Adjust the
software setting appropriately.
B-2 Solving Problems
Check that the power cable is connected properly to
the MediaDock 2000 and a wall outlet.
Check the wall outlet by plugging in another electri-
cal device such as a lamp.
Check that the docking lever is pulled all the way
back.
Try removing the AC power cable from the AC
outlet, reattaching it, and powering on again.
Check the volume control. Push the volume control
lever towards the back of the MediaDock 2000 to
increase the volume.
Advertisement
Table of Contents
