Running The Setup Utility - Windows 95 - NEC VERSA MEDIADOCK 2000 User Manual

Running the Setup Utility — Windows 95
This section describes how to run the MediaDock 2000
Setup utility under Windows 95.
NOTE: When running Windows 95, your Versa
2000 automatically recognizes whether your com-
puter is currently in a docked or mobile configura-
tion.
To begin, locate the NEC MediaDock 2000 Setup Utility
diskette in the shipping carton.
Make sure power to your NEC Versa 2000 computer is
1.
turned off. Dock your MediaDock 2000 to your NEC
Versa 2000 computer.
See "Hardware Setup" in Chapter 2 for instructions on
docking your MediaDock 2000.
2. When you first power on your NEC Versa 2000 com-
puter, Windows 95 automatically recognizes the new
hardware and automatically configures itself for use
with the MediaDock 2000.
For example, Windows 95 displays messages indicating
that your new hardware and audio drivers are installed.
However, you will need to use the NEC MediaDock
2000 Setup Utility (diskette 1 only) to install the online
version of this user's guide and some support files.
Insert the NEC MediaDock 2000 Setup Utility diskette
3.
into the diskette drive.
Click on "Start" from the Taskbar.
4.
Select "Run."
5.
Type a:winstall and click "OK." Wait a few moments
6.
while the system accesses the drive.
3-6 Setting Up and Using the Software