Running The Setup Utility - NEC VERSA DOCKING STATION 4000 Manual

Running the Setup Utility

3-4 Setting Up and Using the Software
This section describes how to use the Docking Station 4000
Setup utility. While running the utility, you can use the fol-
lowing options:
n
To stop the installation, press
n
To accept default settings, press
click "Continue" at the prompts.
n
To change settings, follow the on-screen instructions.
Run the Docking Station 4000 Setup utility as follows.
Follow the instructions in Chapter 2 and dock your NEC
1.
Versa on the Docking Station 4000 and power on.
Boot into Windows, if Windows is not already opened.
2.
(Type and press
win
Close any Windows applications that may be running
3.
(for example, CardView or the NEC Battery Gauge).
Insert the first Docking Station 4000 Setup diskette into
4.
the drive.
From the Windows Program Manager, access the File
5.
pull-down menu and select Run.
Type
6. a:winstall
Respond to the utility prompts as follows:
7.
n
After reading the wINSTALL message that intro-
duces the Docking Station 4000 Setup Utility, click
"OK" or press
n
Specify the disk drive on which to install the
software. Press
default drive c:.
Esc
to open Windows.)
Enter
and press
Enter
Enter to continue with the setup.
or click "OK" to accept the
Enter
.
click "OK," or
Enter,
or click "OK."