Expansion Boards; Precautions; Slot Locations - NEC VERSA DOCKING STATION 4000 Manual

EXPANSION BOARDS

Precautions

Slot Locations

You can install three full-size or half-size AT-style expan-
sion boards in the NEC Docking Station 4000. Before be-
ginning the installation, check the documentation that came
with the board. If you have any switches to set on the board,
do so before starting this procedure.
Always remove expansion boards from the shipping
material very carefully. Static discharge can damage board
components. Take the following precautions when handling
boards:
n
Avoid carpets in cool, dry areas.
n
Before handling a board, discharge any static electricity
by touching a grounded metal object.
n
Always hold a board by its edges. Avoid touching the
components on the board.
Slot locations for expansion boards are shown in the fol-
lowing figure. These slots accommodate any industry stan-
dard 8- or 16-bit expansion board.
Adding Options 4-7