Serial Devices - NEC VERSA DOCKING STATION 4000 Manual

Serial Devices

Use the following procedure to connect a serial printer, mo-
dem, or any other RS-232C device to the COM port on the
docking station.
Serial devices must have a serial cable with a 9-pin female
connector on one end to connect to your docking station.
Other cable requirements depend upon the device.
Before connecting an RS-232C device to your
docking station, make sure the device is set up cor-
rectly. Follow the setup instructions that come with
the option.
1. Turn off and unplug the docking station and any external
options connected to it.
Make sure that any power to the RS-232C device is off
2.
and the power cable is unplugged.
Connect the RS-232C cable to the serial communication
3.
port on the docking station and to the device.
Use the screws provided to secure the connections.
4.
Connecting Peripheral Devices 5-11