External Scsi Devices - NEC VERSA DOCKING STATION 4000 Manual

External SCSI Devices

5-12 Connecting Peripheral Devices
Connect the power cable to the optional device.
5.
Reconnect any options that you disconnected. Turn on
6.
the device and the docking station.
Attach external SCSI devices as follows:
Check that the SCSI device is set up properly. See the
1.
documentation that came with the device to verify switch
and jumper settings.
Turn off and unplug the docking station and any external
2.
devices connected to it.
Locate the external SCSI connector on the back of the
3.
docking station.
Squeeze the tabs on the side of the SCSI cable connector
4.
and attach the SCSI cable to the back of the docking
station.
Connect the other end of the cable to the device.
5.
Securing the Cables