Finishing Up - NEC VERSA DOCKING STATION 4000 Manual

Finishing Up

4-32 Adding Options
5. To complete drive installation, go to "Finishing Up."
Finish up drive installation as follows.
Locate the tabs on the bottom of the docking station
1.
chassis.
Position the drive cage a little behind the tabs and lower
2.
it into the unit.
Slide the drive cage forward until the tabs slide into the
3.
matching holes on the bottom of the drive cage.
Replace the two screws that secure the drive cage in the
4.
docking station.
Connecting SCSI cables