NEC VERSA DOCKING STATION 4000 Manual page 49

Only change docking station sound IRQ and DMA
settings as a last resort. If you change the settings
to run a DOS application, you may need to change
the settings back to the defaults before running
Windows.
In some cases changing these settings can create
system conflicts. If you run into difficulties, change
your settings back to the defaults and call the appli-
cation manufacturer.
Docking Station default settings are as follows:
n
Board type: SoundBlaster Pro Compatible
n
IRQ: 5
n
DMA: 1
If your application indicates that it requires special settings,
proceed as follows.
1. From the DOS prompt, type the following and press
to change to the DS4000 directory.
Enter
cd DS4000
Display the current IRQ and DMA settings by typing the
2.
following and pressing
esscfg
The screen displays the current settings and the follow-
ing four options from which to choose.
1) Set new IRQ channel
2) Set new DMA channel
3) Display current settings
4) Quit
CAUTION
.
Enter
Setting Up and Using the Software 3-13