NEC VERSA DOCKING STATION 4000 Manual page 34

2-12 Docking/Undocking the NEC Versa
Check the status of the lock. You cannot undock the
3.
NEC Versa if the lock is in the Locked position.
Press the Eject button on the front panel of the docking
4.
station.
To use Windows 95 software to undock the NEC Versa,
locate the Eject icon on the screen and click. The soft-
ware puts your NEC Versa into Suspend mode and initi-
ates the undocking sequence.
If the NEC Versa does not eject properly us-
ing the front panel Eject button, go to the next sec-
tion "Emergency Undocking."
Once the connection is broken, pull the NEC Versa for-
5.
ward and remove it from the docking station.
Eject button and lock location