Running The Setup Utility - Windows For Workgroups - NEC VERSA MEDIADOCK 2000 User Manual

Running the Setup Utility — Windows for Workgroups
This section describes how to use the MediaDock 2000
Setup utility under Windows for Workgroups. While run-
ning the utility, you can use the following options:
T
To stop the installation, press
T
To accept default settings, press
click "Continue" at the prompts.
T
To change settings, follow the on-screen instructions.
To begin, locate one NEC MediaDock 2000 Setup Utility
diskette, and two NEC MediaDock 2000 Audio Applica-
tions diskettes in the shipping carton. Run the MediaDock
2000 Setup utility as follows.
NOTE: When running Windows for Workgroups,
your NEC Versa 2000 computer lets you choose a
mobile or docked configuration. See "Choosing a
Configuration" later in this section.
1. Follow the instructions in Chapter 2 and dock your NEC
Versa 2000 computer on your MediaDock 2000. Power
on your computer.
2. Boot into Windows, if Windows is not already opened.
(Type
3. Close any Windows applications that may be running
(for example, CardView, NEC Battery Gauge or the
Distribution Diskette Creator).
Insert the MediaDock 2000 Setup Utility diskette into
4.
the diskette drive.
From the Windows Program Manager, access the File
5.
pull-down menu and select "Run."
3-2 Setting Up and Using the Software
Esc
and press to open Windows.)
win Enter
.
click "OK," or
Enter,