4.
Locate the connectors and alignment key on the SO-DIMM.
A – Connectors
Locate the SO-DIMM expansion port and proceed as follows:
5.
!
!
5-20 Using the System Drives and Bays
SO-DIMM features
Hold the SO-DIMM at a 45 degree angle and align the SO-DIMM contacts
with the socket in the system. Push the connector into the socket.
Press down on the edge of the SO-DIMM opposite the contacts until the lock
tabs on the sides snap into place, securing the module.
Installing the SO-DIMM
B – Alignment Key