Table of Contents
Advertisement
Parameter
Wake Up Alarm
Resume Alarm Time
Intel SpeedStep
Technology
1
Available when power savings is set to Custom
2
Resume alarm time is selectable when wake up from suspend alarm is set
System Switch — Sets the Power button as a power switch or a sleep button.
!
Power Management Under AC — Specifies whether to enable power management
!
features when AC power is in use. When AC power is connected to your NEC
Versa system, power management is disabled (default setting). If you enable this
parameter, the system automatically activates the power management profile you
set, even when AC power is used.
Power Savings Level — Specifies one of four levels of power management.
!
— High Performance — provides good battery life and best performance with only
minimal power conservation. Use while on the road or traveling short distances.
— Longest Life — provides best battery life, the maximum amount of power
savings, and good performance. Use while traveling long distances.
— Off — disables power management and all device timeouts. Works well in an
office environment while powering your NEC Versa with AC power.
— Custom — lets you define power management levels and specific device
timeouts according to your own needs and present environment. Custom lets
you set the following timeouts.
Option
CPU Speed Control
Hard Disk Timeout
Video Timeout
Peripheral Timeout
Power Management Setup
Default
Setting
Disabled
2
Off
Auto
Custom Timeout Options
Definition
Sets CPU performance at one of four levels.
Sets the time delay before your hard disk powers
down.
Sets the time delay before your video powers off.
Sets the time delay before your peripherals are
controlled by power management.
Alternate Setting(s)
Enabled
Set time in 5 min. increments when
Wake Up Alarm is set.
Disabled, Battery Optimized
.
Using the BIOS Setup Utility 3-13
.
Advertisement
Table of Contents
