Replacing The Cover - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

Removing and Replacing the Transport Assembly (for Models 2/20, 4/40, and 6/60 only)

Replacing the Cover

1. Replace the top cover.
• For Model 2/20, insert all screws and tighten.
• For Models 4/40 and 6/60, insert the metal tabs of the cover into
the slots on the library (Figure 2-12 on page 2-31). Insert all
screws, and tighten. Align the screw holes in the front forehead
with the holes in the top of the library, insert screws, and tighten.
2. If the library is rackmounted, follow the steps below:
a. Replace the stop bracket. (For Models 4/40 and 6/60 only. See
Figure 2-11 on page 2-30.)
b. Replace the screws behind the front doors that secure the library
in place.
Chapter 2
Removing and Replacing Major Library Components
2-35