Table 2-6 Description Of Internal Frus (2 Of 2) - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

Table 2-6 Description of Internal FRUs (2 of 2)
Callout FRU ID
#
1 65
2 N/A
3 N/A
4 N/A
5 N/A
6 48
7 3
Chapter 2
Description
Display cable (included in cable kit). Access this part by
removing the library side panels. The display cable needs to be
threaded underneath the right door tray rail to connect to the
motherboard (see Figure 2-25 on page 2-51). Do not connect the
display cable on all levels; only connect the cable located on the
level with the display.
Power switch cable (included in cable kit). Access this part by
removing the chin plate on the front and at the bottom of the
library and the right side panel on the lowest library level.
Mailslot solenoid assembly: Two #4-40 x .375 T-10 screws
secure this part to the inside edge of the library. Remove the
library side panels to access this part.
Magazine lock harness cable (included in cable kit), see Figure
2-29 on page 2-56. Access this part by removing the library side
panels. Secure the cable to the side of the library chassis to
ensure it does not become damaged.
Interconnect cable that connects multi-level libraries (included
in cable kit, see Figure 2-25 on page 2-51).
Chassis fan: Remove all cards from the back of the library.
Remove the four 6-32 T-15 screws that secure the fan inside the
back of the library.
Motherboard: Uses #4-40 x .625 screws to attach (see page 2-50
for more information).
Removing and Replacing Major Library Components
Exploded Views of Replaceable Parts (FRUs)
2-15