Dell PowerConnect M6348 Configuration Manual page 111

log
mirror
redirect
vlan
<0x0600-0xffff>
<cr>
<ethertypekey>
console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log
?
assign-queue
mirror
redirect
<cr>
console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log
Example #6 Configure MAC Access Group
console(config)#interface ethernet 1/g5
console(config-if-1/g5)#mac access-group mac1 ?
in
<cr>
console(config-if-1/g5)#mac access-group mac1 in ?
<1-4294967295>
<cr>
console(config-if-1/g5)#mac access-group mac1 in 6
Configure logging for this access list rule.
Configure the packet mirroring attribute.
Configure the packet redirection attribute.
Configure a match condition based on a VLAN ID.
Enter a four-digit hexadecimal number in the range of
0x0600 to 0xffff to specify a custom Ethertype value.
Press enter to execute the command.
Enter one of the following keywords to specify an
Ethertype (appletalk, arp, ibmsna, ipv4, ipv6, ipx,
mplsmcast, mplsucast, netbios, novell, pppoe, rarp).
Configure the Queue Id assignment attribute.
Configure the packet mirroring attribute.
Configure the packet redirection attribute.
Press enter to execute the command.
Enter the direction <in>.
Press enter to execute the command.
Enter the sequence number (greater than 0) to rank
precedence for this interface and direction.
sequence number has higher precedence.
Press enter to execute the command.
A lower
111
Device Security