Dell PowerConnect M6348 Configuration Manual page 18

Example #2: Configuring the SNTP Server
console(config)#sntp server ?
<ipaddress/domain-name>
console(config)#sntp server 192.168.10.25 ?
key
poll
priority
<cr>
console(config)#sntp server 192.168.10.25
Example #3: Viewing SNTP Information
console#show sntp ?
configuration
status
console#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Enable
Unicast servers:
Server
---------
192.168.0.1
console#show sntp status
Client Mode:
Last Update Time:
Unicast servers:
Server Status
--------- -----------
192.168.10.25 Unknown
18
System Configuration
Enter SNTP server address or the domain name.
Authentication key to use when sending packets to
this peer.
Enable/Disable SNTP server polling.
Configure SNTP server priority.
Press enter to execute the command.
Show the configuration of the Simple Network Time
Protocol (SNTP).
To show the status of the Simple Network Time
Protocol (SNTP).
Key Polling
----------- -----------
Disabled Enabled
Unicast
JUN 08 20:26:02 2009
Last response
--------------------------
00:00:00 Jan 1 1970
Priority
----------
1