Dell PowerConnect M6348 Configuration Manual page 79

Figure 4-4. OSPF Configuration—Stub Area and NSSA Area
Area 2 (0.0.0.2)
IR (5.3.0.0)
10.1.101.1
3000:1:101::/64
Router 1 (1.1.1.1)
Virtual Link
Area 1 (0.0.0.1) - stub
Configure Router A: Router A is a backbone router. It links to an ASBR (not defined here) that routes
traffic outside the AS.
• Globally enable IPv6 and IPv4 routing:
(console) #configure
ipv6 unicast-routing
ip routing
• Configure IP address and enable OSPF on VLAN routing interfaces 6 and 12 and enable IPv6 OSPF on
the interfaces. (OSPF is enabled on the IPv4 interface in the next code group.)
interface vlan 6
routing
ip address 10.2.3.3
ipv6 address 3000:2:3::/64 eui64
ip ospf area 0.0.0.0
ipv6 ospf
exit
interface vlan 12
routing
ip address
10.1.2.1
3000:1:2::/64
10.1.2.2
3000:1:2::
Router 2 (2.2.2.2)
10.2.4.2
3000:2:4::
IR (5.4.0.0)
Area 4 (0.0.0.4) - NSSA
255.255.255.0
10.3.100.3 255.255.255.0
Area 0 (0.0.0.0)
10.1.2.2
Backbone Router (3.3.3.3)
3000:2:3::
10.2.3.3
3000:2:3::
10.3.100.3
3000:3:100:: ASBR (5.1.0.0)
10.2.3.3
3000:2:3::
Routing Configuration
79