Table of Contents
Advertisement
Chapter 9 : Troubleshooting
6. Open the paper cassettes and remove any
jammed or partially fed paper.
7. If paper was fed from the Multi-purpose tray,
remove all of the paper from the tray,
including any jammed or partially fed paper.
8. Reload the Multi-purpose tray.
9. Close the paper cassettes and resume
printing.
Clearing a Jam at the Output Area
A sheet of paper jammed at the paper exit.
1. If the printer is equipped with a Face-up
output tray, remove the output tray so you can
access the printer exit opening.
9-10
NEC SuperScript 1260 User's Guide
2. Look for a sheet of paper protruding from the
exit opening.
3. Firmly but carefully pull the sheet of paper
out of the printer.
4. Reinstall the Face-up output tray
WARNING! The rear output slot may be
very hot.
Advertisement
Table of Contents
Troubleshooting
