NEC 1260 - SuperScript - Printer User Manual page 98

Chapter 7 : Printer Options
located on the right side of the feeder fit into
the corresponding openings in the bottom of
the printer.
12. Make sure the printer and 500-Sheet feeder
are firmly connected.
13. Use two feeder joints to fasten the rear of the
500-Sheet feeder to the rear of the printer.
14. Remove the 250-Sheet cassette and the 500-
Sheet cassette.
7-4 NEC SuperScript 1260 User's Guide
15. Use two feeder joints to fasten the front of the
500-Sheet feeder to the front of the printer.
WARNING! Do not operate or move the
printer and 500-Sheet feeder if the feeder
joints are not in place.
16. Install the 250/500-Sheet cassettes into the
printer.
17. Connect the AC Power Cord to the rear of the
printer.
18. Connect the other end of the AC Power Cord
to a grounded AC wall outlet.
19. Switch ON the printer power.