Brother HL 5030 - B/W Laser Printer Service Manual page 128

NOTE:
When re-assembling the thermistor to the FU frame upper, ensure the direction of the
thermistor is correct referring to the figure below;
FU frame upper
(8) Remove the two cup B M3x20 Taptite screws.
(9) Remove the FU frame upper from the FU frame lower.
FU frame lower
Hook
Pin
Hook
Taptite, cup B M3x20
Thermistor
Taptite, cup B M3x12
Fig. 4-53
Hook
Fig. 4-54
4-31
HL-5030/5040/5050/5070N SERVICE MANUAL
Thermistor
Pin
Taptite, cup B M3x20
FU frame upper
Hook