Print Speeds With Various Settings - Brother HL 5030 - B/W Laser Printer Service Manual

CHAPTER 1 GENERAL
3.7

Print Speeds with Various Settings

Print speed of the HL-5030/5040/5050/5070N printers is up to 16/17 ppm when loading A4 or
Letter size paper from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4 / Letter size>
Media type setting
Transparencies
Thin Paper
Plain paper,
Env.Thin
Thick Paper,
Envelopes
Thicker/Bond Paper,
Env.Thick
<Smaller size than A4 or Letter>
Media type setting
Transparency
Thin Paper
Plain paper,
Env.Thin
Thick Paper,
Envelopes
Thicker/Bond Paper,
Env.Thick
*The print speed may vary according to conditions, such as paper size and paper tray.
NOTE:
• When a smaller size paper than A4 or Letter is printed, the temperature on both edges of
the fixing unit is much higher than the temperature on the center of the unit where the
paper is fed depending on the setting or model. Therefore, the print speed is slowed in
order to decrease the temperature on the edges after the specified time, it is maximum
print speed when you first start printing.
• Max. speed is 16/17 ppm or more. It varies depending on the paper size.
All models
Up to 16/17 ppm
Up to 16/17 ppm
Up to 16/17 ppm
Up to 16/17 ppm
4 ppm *
All models
Up to 16/17 ppm
Up to 16/17 ppm
8 ppm after 5 min. have passed.
8 ppm after 30 sec. have passed.
4 ppm *
1-16