Multi Media Card (Mmc) / Secure Device (Sd) Card - Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz User Manual

Installing the Keypad
Figure 6-2
Perform a cold boot.
4.

Multi Media Card (MMC) / Secure Device (SD) Card

The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see
page 6-2).
NOTE SD cards are inter-operable with MMC cards and can also be used in MC909X mobile computers.
CAUTION
To insert the MMC/SD:
Suspend the mobile computer.
1.
Remove the two keypad screws and slide the keypad down and lift off (see
2.
Lift the MMC/SD retaining door.
3.
Position the MMC/SD, with the contacts down, into the MMC/SD holder. The MMC/SD corner notch fits into
4.
the holder only one way. Snap the retaining door closed.
Do not remove the keypad while the mobile computer is on and do not operate the mobile computer
with the keypad detached. Follow proper ESD precautions to avoid damaging the MMC/SD. Proper
ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
Accessories 6 - 3
Figure 6-1 on
Figure 6-1 on page 6-2).