Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz User Manual page 204

7 - 4 MC909X User Guide
Troubleshooting the Mobile Computer (Continued)
Table 7-1
Problem
The mobile computer
does not accept scan
input.
WLAN or WWAN
connection is lost
when the mobile
computer is
connected to a host
computer using
ActiveSync.
Cause
Scanning Verify that the unit is loaded with a scanning application. See
application is not the System Administrator.
loaded.
Unreadable bar Ensure the symbol is not defaced.
code.
Distance between Ensure mobile computer is within proper scanning range.
exit window and bar
code is incorrect.
Mobile computer is Ensure the mobile computer is programmed to accept the type
not programmed for of bar code being scanned.
the bar code.
Mobile computer is If a beep on a good decode is expected and a beep is not
not programmed to heard, check that the application is set to generate a beep on
generate a beep. good decode.
Battery is low. If the scanner stops emitting a laser beam when the trigger is
pressed, check the battery level. When the battery is low, the
scanner shuts off before the mobile computer low battery
condition notification.
Note: If the scanner is still not reading symbols, contact the
distributor or Symbol Technologies.
Microsoft security Disconnect from the WLAN or WWAN network prior to
feature prevents connecting to a host computer using ActiveSync.
connection to two
separate networks.
Solution