HP Integrity rx4610 User Manual page 132

Chapter 10
Table 10-3. Using the Setup Screens
Press To
← Scroll left through the main menu screens.
→ Scroll right through the main menu screens.
ENTER Select a sub-menu item or accept a drop-down choice.
TAB Select a field within a value (e.g. date field).
F9 Select the default value.
F10 Save your changes and exit Setup.
ESC Go back to a previous screen.
Scroll up through menu items or value lists.
↑
Scroll down through menu items or value lists.
↓
Primary Screens
The BIOS Setup Utility uses these five primary screens:
Main
Advanced
Security
System Management
Exit
124
Displays the BIOS version, processor type, and lets
you configure the system time and date. For details
on this screen, see Table 10-4.
Lets you configure boot settings, configure peripheral
devices, select the IDE controller and hard disk drive,
select the type of floppy drive, and configure the
chipset settings. For details on this screen, see Table
10-5.
Let's you establish Administrator and user passwords.
For details on this screen, see Table 10-6.
Configure Console Redirection and Service Boot
options. For details on this screen, see Table 10-7.
Exits the utility with or without saving utilities
options as well as allows the management of custom
settings. For details on this screen, see Table 10-8.
Configuring the HP Server