HP Integrity rx4610 User Manual page 140

Chapter 10
Table 10-7. BIOS Setup System Management Screen Menu Items
Menu Item Default Value
Console Redirection N/A
Service Boot [Disabled]
Enabled
Exit
Table 10-8 describes the menu items available on the Exit screen. Default values
appear in brackets.
Table 10-8. BIOS Setup Exit Screen Menu Items
Menu Item
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
132
Description
Selecting this option allows you to
configure for console redirection
Enabling this item will allow you to
boot into Service Partition Boot mode.
The item will be automatically reset to
"Disabled" on the next system boot.
Description
Lets you exit the system setup and save your changes in
CMOS. Clicking on the menu item offers a prompt for
which you can answer Yes or No. Either response causes
you to exit the setup utility.
Lets you exit the system setup and discard your changes.
Clicking on the menu item offers a prompt for which you
can answer Yes or No. Either response causes you to exit
the setup utility.
Lets you load setup with the factory defaults. Clicking
on the menu item offers a prompt for which you can
answer Yes or No. You do not exit the setup utility.
Lets you load setup with custom defaults. Clicking on
the menu item offers a prompt for which you can answer
Yes or No. You do not exit the setup utility.
Lets you save the current set of values into a file that you
could later load using the Load Custom Defaults menu
item. Clicking on the menu item offers a prompt for
which you can answer Yes or No. You do not exit the
setup utility.
Lets you discard the changed values you have
accumulated during this setup session. Clicking on the
menu item offers a prompt for which you can answer Yes
or No. You do not exit the utility.
Configuring the HP Server