Yamaha Electone STAGEA ELB-01 Owner's Manual page 42

3
Reference Page
Reverb (page 48)
NOTE
Initial Touch may not be
effective on some Voices,
such as Organ Voices.
42 ELB-01 Owner's Manual
Voice Condition [Page 1]
1
VOL.¿24
TOUCH¿ 8 FEET÷PRESET
3
In this display, you can adjust the basic Voice controls, including panning, touch
sensitivity and volume.
The items included in this page differ between the Pedal Voice sections and the other
sections. Initial Touch is not applied to the Pedal Voices.
1
Volume
Fine adjustment of the Voice volume. See page 26 for more information.
2
Reverb
Determines the amount of reverb applied to each Voice section.
When the Reverb Depth setting in the Reverb display is set to the minimum, the
setting here will have no effect. See page 48 for details.
Press the [B] button to make the "÷" indicator flash, then use the DATA CONTROL
dial to change the setting.
3
Touch
Controls volume and timbre according to the velocity at which you play the keys. The
harder you play the keys, the greater the volume and the brighter the timbre will
become.
Higher settings make the change wider. The minimum setting produces no effect. This
function is not applied to the Pedal Voices.
Press the [C] button to make the "¿" indicator flash, then use the DATA CONTROL
dial to change the setting.
Range: 0 – 14
4
Feet
Determines the octave setting of the Voice, letting you use the Voice over a wide
register. There are three settings: 4', 8' and 16' (4' is highest and 16' is lowest). A 2'
setting is added to the Pedal Voice sections. Preset is the original (factory) setting.
Press the [D] button to make the "÷" indicator flash, then use the DATA CONTROL
dial to change the setting.
2
REV.÷20 ¨1⁄
4