Assigning Sounds To The User Keyboard Percussion - Yamaha Electone STAGEA ELB-01 Owner's Manual

4
88 ELB-01 Owner's Manual

Assigning sounds to the User Keyboard Percussion

You can assign any desired drum and percussion sound to any key or pedal, and your
original setups can be saved to eight memory locations: User 1 through User 8. The
User setting saved in the User memory location can be called up by using the Keyboard
Percussion [1] or [2] buttons.
In the instructions below, drum sounds are assigned to User 1 and called up with
Keyboard Percussion [1] button.
1
Turn on the Keyboard Percussion function by pressing the
Keyboard Percussion [1] button.
The Keyboard Percussion display appears.
[Page 1] Keyboard Percussion Display
<KBP1>
¿PRE1
2
Select "User 1" here.
Press the [C] button to make the "¿" indicator flash, then use the DATA
CONTROL dial to select "User 1."
<KBP1>
¿USER1 KIT÷Wonder
3
Select the desired percussion kit.
Press the [D] button to make the "÷" indicator flash, then use the DATA
CONTROL dial to select the kit.
Refer to the "Kit Assign List" on page 93.
<KBP1>
¿USER1 KIT÷EL
⁄
KIT÷Wonder
⁄
⁄