Yamaha Electone STAGEA ELB-01 Owner's Manual page 91

To erase one instrument:
Simultaneously hold down the [D] button corresponding to the [Clear] in the display
and press the key (or pedal) corresponding to the instrument you wish to erase.
(A short 'beep' sound indicates that the instrument has been erased.)
¿<BASS DRUM>
¿02:BD Heavy
Do not turn the power off while the Keyboard Percussion settings are being saved.
To erase all instruments:
You can clear all assignments in Page 3 of the Keyboard Percussion display.
1
Press, then release the [D] button corresponding to [CLEAR] in
the display.
The following display appears, prompting confirmation of the operation. You
can cancel the operation at this point by pressing the [D] button corresponding
to [Cancel].
¿<BASS DRUM>
¿02:BD Heavy
2
Press the [C] button to erase all data. When the [C] button is
pressed, a "Completed" message momentarily appears on the
display.
The Keyboard Percussion setting you have created is automatically saved when
you switch to another display.
≤Clear assignments?≤
≤[Clear]
[SET]‹
[CLR]
Press the [D] button...
Press the key.
[SET]‹
[CLR]
[Cancel]≤
ELB-01 Owner's Manual
4
91