Removing a PCI card support bracket
To remove a PCI card support bracket:
1.
Disconnect power from the system
access panel
2.
Remove the two screws that attach the bracket to the chassis (1).
Figure 5-26
3.
Lift the bracket out of the chassis (2).
Installing a PCI card support bracket
To install the PCI card support bracket:
1.
Disconnect power from the system
access panel
ENWW
(Predisassembly procedures on page
(Removing the side access panel on page
Removing a PCI card support bracket
(Predisassembly procedures on page
(Removing the side access panel on page
57) and remove the side
61)
57) and remove the side
61).
Removing and replacing components
77