Pci Card Support Bracket; Removing A Pci Card Support Bracket; Installing A Pci Card Support Bracket - HP xw4600 Service And Technical Reference Manual

PCI card support bracket

Some PCI cards have retainers installed to prevent movement during shipping.

Removing a PCI card support bracket

To remove a PCI card support bracket:
1. Disconnect power from the system
access panel
2. Remove the two screws that attach the bracket to the chassis (1).
Figure 4-26
3. Lift the bracket out of the chassis (2).

Installing a PCI card support bracket

To install the PCI card support bracket:
1. Disconnect power from the system
access panel
80 Chapter 4 Removal and replacement procedures
(Predisassembly procedures on page
(Removing the side access panel on page
Removing a PCI card support bracket
(Predisassembly procedures on page
(Removing the side access panel on page
58) and remove the side
64)
58) and remove the side
64).
ENWW