Removing And Replacing Components - HP xw4600 Service And Technical Reference Manual

Removing and replacing components

This section provides procedures to remove and install hardware components on your workstation.
Before servicing your workstation, review the safety information and precautions in the
considerations on page
1. Read all safety information and precautions.
2. Locate and clear a suitable work area.
3. Power down the workstation and disconnect power from the workstation.
4. Gather your tools.
5. Service the workstation.
6. Restore power to the workstation.
60 Chapter 4 Removal and replacement procedures
53, and the Safety and Regulatory Information for your workstation.
Service
ENWW