System Management; Computer Setup (F10) Utility - HP xw4600 Service And Technical Reference Manual

3

System management

This section describes the various tools and utilities that provide system management for your
workstation and includes the following topics:
●
Computer Setup (F10) Utility on page 27
●
Workstation management on page 35

Computer Setup (F10) Utility

The Computer Setup (F10) Utility enables you to:
● Change factory default settings and set or change the system configuration, which might be
necessary when you add or remove hardware.
● Determine if all of the devices installed on the workstation are recognized by the system and
functioning properly.
●
Determine information about the operating environment of the workstation.
● Solve system configuration errors that are detected but not automatically fixed during the Power-
On Self-Test (POST).
●
Establish and manage passwords and other security features.
● Establish and manage energy-saving time-outs (not supported on Linux platforms).
● Modify or restore factory default settings.
● Set the system date and time.
●
Set, view, change, or verify the system configuration, including settings for processor, graphics,
memory, audio, storage, communications, and input devices.
● Modify the boot order of installed mass storage devices such as SATA, SAS, diskette drives, optical
drives, network drives, and LS-120 drives.
● Configure the boot priority of SATA and SAS hard-drive controllers.
● Enable or disable Network Server Mode, that enables the workstation to boot the operating system
when the power-on password is enabled with or without a keyboard or mouse attached. When
attached to the system, the keyboard and mouse remain locked until the power-on password is
entered.
●
Select POST Messages Enabled or Disabled to change the display status of POST messages.
POST Messages suppresses most POST messages, such as memory count, product name, and
other non-error text messages. If a POST error occurs, the error is displayed regardless of the
ENWW Computer Setup (F10) Utility 27