Computer Setup (F10) Utility Menu - HP xw4600 Service And Technical Reference Manual

To access the Computer Setup (F10) Utility menu:
1. Power on or restart the workstation.
2. As soon as your display is active and F10=Setup appears in the lower right corner of the screen,
press the
NOTE: If you do not press
on, and press
boot if you miss the opportunity to press F10.
3. Select your language from the list and press the
menu, five headings are displayed: File, Storage, Security, Power, and Advanced.
4. Use the left and right arrow keys to select the appropriate heading. Use the up and down arrow
keys to select an option, and then press Enter.
5. To apply and save changes, select File>Save Changes, and then select F10=YES.
●
If you have made changes that you do not want applied, select Ignore Changes and then
select F10=YES.
●
To reset to factory settings, select File>Default setup>Restore Factory Settings as
Default. Press
restores the original factory system defaults.
CAUTION: Do not power off the workstation while the ROM is saving your Computer Setup (F10)
Utility changes because the Complementary Metal-Oxide Semiconductor (CMOS) could become
corrupted. After you exit the F10 Setup screen, it is safe to disconnect power from the workstation.

Computer Setup (F10) Utility menu

NOTE: With new BIOS releases, the following content is subject to change , so your menu might
appear different than shown.
Table 3-1 Computer Setup (F10) Utility menu descriptions
Heading
File
ENWW
F10 key .
F10 at the appropriate time, try again. Turn the workstation off, then
F10 again to access the utility. You can also press the
F10 to accept the changes. Select Apply Defaults and Exit. This option
Option
System ● Product Name
Information
● SKU Number
● Processor Type/Speed/Stepping
● Cache Size (L1/L2)
● Installed Memory Size
● Integrated MAC
●
System BIOS
●
Chassis Serial Number
●
Asset Tracking Number
About Displays copyright information.
Set Time and Enables you to set system time and date.
Date
Ctrl + Alt + Delete
Enter key. In the Computer Setup (F10) Utility
Description
Computer Setup (F10) Utility
keys before
29