Step I. Use The Hp Netserver Navigator Cd-Rom To Prepare Disks; Check Latest Versions; Create Drivers Diskette And Instructions - HP D5970A - NetServer - LCII Configuration Manual

Integrated hp netraid controller configuration guide
Hide thumbs Also See for D5970A - NetServer - LCII:
Table of Contents

Advertisement

Chapter 6
Step I. Use the HP NetServer Navigator CD-ROM
to Prepare Disks
In this step, you will use the HP NetServer Navigator CD-ROM to create the
diskettes you need to install the non-I
NetRAID configuration utility specific to your NOS. You need to:
Verify that you have the most recent version of the HP NetServer
Navigator CD-ROM
Create the diskette(s) containing the non-I
Create the diskette(s) containing the NOS-specific configuration utility

Check Latest Versions

To ensure that you have the latest versions of the software, obtain the current
Status Report for your HP NetServer Navigator CD-ROM. This report describes
any software updates since the CD-ROM was created, and indicates whether you
need any updates and how to obtain them.
Each version of the CD-ROM has a four-digit Document Number printed on the
disk. Obtain the Status Report for your CD-ROM in one of these ways:
FAX: Call HP's FAX system at 1-800-333-1917 (or 1-208-344-4809 from
your FAX machine). Request the FAX using the Document Number.
Internet: Access URL
http://www.hp.com/netserver/servsup. Click on the line that
corresponds to your document number.
Internet FTP: Address: ftp://ftp.hp.com/pub/servers
BBS: Call 1-208-344-1691; download <document-number>.txt
from the NSNAVCD library.
CompuServe: GO HPPC; download <document-number>.txt from
the HP NetServer library.

Create Drivers Diskette and Instructions

You must use the HP NetServer Navigator CD-ROM to create the diskette
containing the drivers for your NOS and the instructions for installing them.
58
HP NetRAID Software
O HP NetRAID drivers and the HP
2
O drivers and instructions
2

Advertisement

Table of Contents
loading

Table of Contents