Make Nos-Specific Configuration Utility Diskette - HP D5970A - NetServer - LCII Configuration Manual

Chapter 6
1. Turn on the HP NetServer and monitor, and insert the HP NetServer
Navigator CD-ROM into the drive. Turn off the HP NetServer power, wait
10 seconds, and turn it back on again.
2. From the HP Navigator Main Menu, choose Configuration and
Installation Assistant.
3. From the Configuration Assistant menu, choose Custom.
4. From the Gather Information window, choose your NOS. If necessary,
also select your version of the NOS.
5. When you see the message, "Would you like to use HP's automated mode
of NOS installation?" click No.
6. From the Custom Configuration menu, choose Create Driver
Diskette(s).
7. From the Create Driver Diskette(s) window, choose Create Driver
Diskette(s). Select the diskette to create, click Execute, and follow the
onscreen instructions.
8. When the driver diskette is complete, click Back to return to the Custom
Configuration menu.
9. From the Custom Configuration menu, choose Show NOS Installation
Instructions.
10. On the Show NOS Installation Instructions window, click Save to Disk.
Later in these procedures, you will print the Network Operating System
Installation Instructions.
11. Click Back to return to Configuration Assistant, and click Back again to
return to the Main Menu. Do not exit the HP NetServer Navigator system,
because in the next step, you will create the NOS-specific configuration
diskette.

Make NOS-specific Configuration Utility Diskette

You must make another diskette containing the NOS-specific configuration
utility. To create the diskette needed to install the NOS-specific utility for
Windows NT or Novell NetWare:
1. From the HP Navigator Main Menu, choose NetServer Utilities.
2. Select More NetServer Utilities, then choose Diskette Library.
3. From the Diskette Library, do the following:
HP NetRAID Software
59