Print The Network Operating System Instructions; Step J. Install Nos And Hp Netraid Drivers; Install Network Operating System (If Necessary); Install Hp Netraid Series Driver - HP D5970A - NetServer - LCII Configuration Manual

Chapter 6
For Windows NT, create the utility diskette by selecting NetRAID
Assistant for WindowsNT and Windows95 in the diskette library.
For NetWare, select NetRAID Utilities for NetWare in the diskette
library.
4. Follow the onscreen instructions to create the NOS-specific diskette.
5. Remove the HP NetServer Navigator CD-ROM and click Exit to reboot
the HP NetServer.

Print the Network Operating System Instructions

Print the Network Operating System Installation Instructions you saved
previously onto the drivers disk. In Step J, you will follow these instructions to
load the drivers from the driver diskette.

Step J. Install NOS and HP NetRAID Drivers

Install Network Operating System (if necessary)

If the NOS is not already installed on the HP NetServer, install it according to
the instructions you printed in Step I after you created the HP NetRAID drivers
diskette. If you are using Novell Netware, also see the Novell NetWare
Installation book. For the HP NetServer LH 3 or LH 3r, the NOS can be installed
on a non-hot-swap drive or on a logical drive in the RAID subsystem.

Install HP NetRAID Series Driver

Load the appropriate driver as instructed in the Network Operating System
Installation Instructions that you just printed in Step I earlier in this chapter. The
driver names are listed in the table that follows.
Network Operating System
Microsoft Windows NT 4.0
NetWare 3.2x
NetWare 4.1x
60
HP NetRAID Software
HP NetRAID Drivers
mraidnt.sys
Mega3_1x.dsk
Mega4_xx.ham
Mega4_xx.ddi